Stainless Trim

Remove Dents From Your Stainless Steel Trim

No one likes driving a bad old car that is not decent, making your old car look decent you have to consider using a stainless trim. All the same your car may be having trim, but still, the car is not decent as the trim have dents. Don’t worry as you can remove the dent in your stainless trim by following the guide below.
First step: Take a black tip marker and use it to prepare your piece of trim then correctly color the area with the dent. Then take a bastard file that is not too rough and carefully rasp the colored area and be gentle to avoid scratching your deep color.
Second step: You have already discovered the dented area, and you have to start working on it, first flip the over and push on the dented area using a metal punch. When doing this kindly be gentle and push on the different points of the dented area. Take your time and be patient repent this process and until your dent is completely cleared, it is accepted to use your marker to check of a different dent in the same area.

Stainless Trim
Step three: once you are done with step two, you can repeat step one to check for a different dent in your trim, after you are done with all dents in your stainless trim you should properly clean it to make sure that your trim is shiny and clean
Forth step: after the above steps you need to leave your trim smooth, and therefore you can use a wet 220 grit sandpaper to remove the scratches, and them polish your surface using a 400 grit sandpaper.
You will want your stainless trim look shiny as it was initially so considered polishing it, however, if you can’t polish properly you can look for a professional who will polish your stainless trim to the level best.